*) Minimum working pressure required from the carrier depends on the amount of oil that flows through the hammer.
This technical data is indicative only and subject to change without notice.
Hammers-Special Features
Rammer Hammers have many special features designed to make your work easier and faster. These special features can be combined in several ways to create a solution that suits your needs. Special features are described below.
City Hammers
FULL LINE OF SOUND SUPPRESSED HAMMERS THAT MEET STRICT NOISE REGULATIONS
Noise level is much lower than that of standard hammers
ENHANCED PRODUCTIVITY
operator doesn't fatigue easily and keeps better alert with lower noise and vibration levels of City housings
LESS WEAR OF COMPONENTS
dust tight housing reduces wear of hammer and bushings
improved vibration dampening keeps the carrier in good condition
PRO controller
For optimum breaking energy and control, Rammer gives the breaking professional the one and only available hammer impact energy control system, the Pro controller.
The system gives control of the breaking application to the operator whilst ensuring hammer and component protection.
Tunneling Hammers
The E 66 N is available as TUNNEL version. It features:
CITY JET as standard
Ramlube as standard
and lots more...
UNIRAM Hammers
The UNIRAM hammer is pin mounted and designed for low working height. The other design criteria have been either low weight (S 21 and S 22) or tucking under (S 23 and S 25 N).
BENEFITS:
Low working height
Reduce mounting costs
Low weight hammer (S 21 and S 22)
Excellent transport geometry (S 23 and S 25 N)
RAMLUBE
AUTOMATIC LUBRICATION SYSTEM
Lubricating of the tool and the tool bushings of Rammer hammers is made very easy with the Ramlube automatic lubrication system.
Combined with correct operation practices, Ramlube gives following advantages:
longer tool life
longer bushing life
higher hammer utilization rate
Underwater Hammers
Air flushing channels are standard features of:
S 22, S 23 N, S 27 and S 29
E 64, E 66 N and E 68
G 80, G 90 and G 100
Check your operating manual for other requirements!
Water Jet
EFFECTIVE DUST HANDLING
Especially in tunnelling and demolition applications there is a need to reduce the amount of dust caused by the breaking operation.
RAMMER WATER JET suppresses dust effectively in any application!
The JET-version*) hammers have water spray plumbing integrated in the hammer housing.
*) JET-versions are available for E 60 CITY-series, and G 80,G 90 and G 100-series.
